powered by Legistar InSite
File #: PZ 18--003    Version: 1
Type: Design Reviews Status: Passed
File created: 2/7/2018 In control: City Council
On agenda: Final action: 3/5/2018
Title: Design Review: Silverbrooke Unit V 44-Lot Townhouse Development Applicant: Kerley Family Homes
Attachments: 1. SilverbrookeDesignMotion.docx, 2. Design Review Models ForLegistar.pdf
title
Design Review: Silverbrooke Unit V 44-Lot Townhouse Development
Applicant: Kerley Family Homes
body
Prepared by: Zoning Staff
Date: February 26, 2018
Recommendation: Approval with the following conditions:
1. That all other zoning conditions not varied herein from approvals dated February 20, 2006, July 17, 2006, February 4, 2008, November 7, 2011, July 23, 2012, May 6, 2013 and January 4, 2016 be in full force and effect.
2. That the cluster homes shall contain a minimum of 1900 square feet of climate controlled living space and a minimum 2-car garage. Not more than ten (10) homes may be the minimum size of 1900 square feet. The remaining cluster homes shall contain a minimum of 2000 square feet. : Per square footage requirements, Dylan model is denied, Jasper, Madeline and Sawyer are approved.
3. That the architectural style shall be traditional with a combination of brick, stone, or cement based siding such as hardi-plank. Stucco type siding will be limited to architectural accents.
4. That the architectural style and elevations for the development shall not be repeated at a rate greater than the same architectural style and elevation once every three (3) building lots on the same road frontage and across the same street.
5. That townhome clusters not have model elevations arranged in the same order at a frequency of more than every third cluster.
6. That all homes throughout the community shall offer a variety of glass doors for the homebuyer to select in addition to wood-style doors.
7. That houses adjacent to each other use different colors to further differentiate units. Differences in stone and brick are also encouraged to further break up the elevations.
8. That per UDC Section 5-53, side and rear building elevations should be substantially consistent with the front building elevation. Side fa?ades should be at least 50 percent brick and stone. Rear facades do not have a minimum suggested standard for primary materials unless they a...

Click here for full text